National Item Identification Number
00-445-4857
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
86184
86184
86184
86184
Reference Numbers (Part Numbers)
TV5180
73201PC12
80264PC10
96306-01E FIND 12
Required Categories
MATERIAL DOCUMENT AND CLASSIFICATION
REFERENCE NUMBER DIFFERENTIATING CHARACTER
Required Description
MIL-F-1148 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL WILL BE IN ACCORD