National Item Identification Number
00-474-0251
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
82796
D9182
0GPN0
FYR-FYTER SALES AND SERVICE INC
5602 ELMWOOD AVE SUITE 102
INDIANAPOLIS
IN
46203
317-784-8997
8T452
FYR-FYTER SALES AND SERVICE INC
2520 READING RD
CINCINNATI
OH
45206
513-751-8384
D9182
Reference Numbers (Part Numbers)
16-701-776
16701776
50111
50111
50111
861-X
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
COPPER OVERALL
0.656 INCHES NOMINAL
1 ROUND
1.000 INCHES NOMINAL
1 ROUND
1