National Item Identification Number
00-485-8945
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
22787
PRECISIONAEROSPACE CORP
DBA PRECISION ENGINE CONTROL
11661 SORRENTO VALLEY RD
SAN DIEGO
CA
92121
858-792-3217
53496
SCHRAMM INC
800 E VIRGINIA AVE
WEST CHESTER
PA
19380
610-344-3134
59501
77820
Reference Numbers (Part Numbers)
10-3317
10-3317
10-3317
10-3317
59590042
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
STEEL COMP 1010 OVERALL
SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
0.196 IN