National Item Identification Number

00-517-8797

National Stock Number

Item Name

WASHER,FLAT

Federal Supply Class

5310

Description

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Commercial and Government Entity Code (Supplier Data)

---

18876

---

---

99657

---

MAROTTA CONTROLS INC.
78 BOONTON AVE
MONTVILLE
NJ
07045
973-334-7800

---

36334

---

INDAL TECHNOLOGIES INC
3570 HAWKESTONE RD
MISSISSAUGA
L5C 2V8
CANADA
905-275-5300

---

99657

---

MAROTTA CONTROLS INC.
78 BOONTON AVE
MONTVILLE
NJ
07045
973-334-7800

---

Reference Numbers (Part Numbers)

10379201
107331
729073-0001
729073-0001

Required Categories

MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE

Required Description

STEEL COMP 302 OVERALL
QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
0.09