National Item Identification Number
00-531-1400
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
99872
ENTRON INDUSTRIES LP
DBA ENTRON INDUSTRIES PROPERTY DIV
11241 QUEENS BLVD STE 100
FOREST HILLS
NY
11375
718-261-8748
24446
27914
02734
LOCKHEED MARTIN CORPORATION
DBA LOCKHEED MARTIN
3 EXECUTIVE CAMPUS-6TH FLOOR
CHERRY HILL
NJ
08002
856-792-9830
Reference Numbers (Part Numbers)
B30A1000M15B
N401P8E
2074181-2307
82278-155
82278-155
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT
Required Description
COPPER ALLOY 11 OVERALL
QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NIC
