National Item Identification Number
00-595-5313
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
01843
AMBAC INTERNATIONAL CORPORATION
910 SPEARS CREEK COURT
ELGIN
SC
29045
803-462-9625
01843
AMBAC INTERNATIONAL CORPORATION
910 SPEARS CREEK COURT
ELGIN
SC
29045
803-462-9625
29510
31007
92679
Reference Numbers (Part Numbers)
SR400440
SR7914-2
62642D
62642D
62642D
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
STEEL COMP 1010 OVERALL
QQ-S-633-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVE
