National Item Identification Number
00-595-6113
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
16712
SIEMENS DEMAG DELAVAL TURBOMACHINERY
INC.
840 NOTTINGHAM WAY
TRENTON
NJ
08638
609-890-5473
16712
SIEMENS DEMAG DELAVAL TURBOMACHINERY
INC.
840 NOTTINGHAM WAY
TRENTON
NJ
08638
609-890-5473
16712
SIEMENS DEMAG DELAVAL TURBOMACHINERY
INC.
840 NOTTINGHAM WAY
TRENTON
NJ
08638
609-890-5473
16712
SIEMENS DEMAG DELAVAL TURBOMACHINERY
INC.
840 NOTTINGHAM WAY
TRENTON
NJ
08638
609-890-5473
16712
SIEMENS DEMAG DELAVAL TURBOMACHINERY
INC.
840 NOTTINGHAM WAY
TRENTON
NJ
08638
609-890-5473
24617
Reference Numbers (Part Numbers)
SG1913PC42
SG1914PC42
SG1965PC22
SG1966PC22
S323F
1923395
285-41-1103PC42;
Required Categories
MATERIAL
SURFACE TREATMENT
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAM
Required Description
STEEL OVERALL
CADMIUM OVERALL
1.250 INCHES NOMINAL
1 ROUND
1.940 INCHES NOMI