National Item Identification Number
00-620-8214
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
59462
TEMPLETON KENLY AND CO INC
2525 GARDNER RD
MAYWOOD
IL
60153
708-865-1500
18876
NSN (National Stock Number) 5310-00-620-8214, 5310006208214 NIIN (National Identification Number) 00-620-8214, 006208214
Part Numbers (Reference Numbers)
1000-17-0
9033825
Required Categories
MATERIAL
HOLE DIAMETER
LENGTH
CENTER HOLE SHAPE STYLE
CROSS-SECTIONAL SHAPE
Required Description
COPPER OVERALL
0.220 INCHES MINIMUM AND
0.280 INCHES MAXIMUM
0.845 INCHES MIN
