National Item Identification Number
00-066-9410
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
05606
GENERAL DYNAMICS ARMAMENT AND
TECHNICAL PRODUCTS INC.
128 LAKESIDE AVE
BURLINGTON
VT
05401
802-657-6109
05606
GENERAL DYNAMICS ARMAMENT AND
TECHNICAL PRODUCTS INC.
128 LAKESIDE AVE
BURLINGTON
VT
05401
802-657-6109
Reference Numbers (Part Numbers)
133B7486
135B7486
Required Categories
PERIPHERAL SHAPE STYLE
WIDTH ACROSS FLATS
CENTER HOLE SHAPE STYLE
CROSS-SECTI
Required Description
5 ROUND W/FLATS
1.150 INCHES NOMINAL
1 ROUND
1 RECTANGULAR
0.062 INCHES NOMI
