National Item Identification Number
00-679-7038
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
19207
29510
29510
24617
73342
29510
31007
92679
Reference Numbers (Part Numbers)
10863068
147127
147127H1
6758202
6758202
897222R1
897222R1
897222R1
8972
Required Categories
MATERIAL
SURFACE TREATMENT
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAM
Required Description
STEEL OVERALL
CADMIUM OVERALL
0.380 INCHES NOMINAL
1 ROUND
0.875 INCHES NOMI