National Item Identification Number
00-708-9844
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
53591
SCHWITZER ENGINE COMPONENTS
A HOUSEHOLD INTL CO
6040 W 62ND ST
INDIANAPOLIS
IN
46278
317-328-3100
62265
VOLVO TRUCKS NORTH AMERICA INC
7825 NATIONAL SERVICE RD
GREENSBORO
NC
27402
757-523-0973
Reference Numbers (Part Numbers)
C115396
5UU0275
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HARDNESS RATING
HOLE DIAMETER;
Required Description
STEEL COMP 1020 OVERALL
QQ-S-633,CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL