National Item Identification Number
00-075-1584
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
03476
REEDRILL INC
DBA REEDRILL TEXOMA
3501 S FM HWY 1417
DENISON
TX
75021
903-786-2981
0E9N0
DAVID BROWN HYDRAULICS INC
DBA HYDRECO
2915 WHITEHALL PARK DR
CHARLOTTE
NC
28273
704-716-9023
90166
97907
TEREX CORP
5400 S 49TH WEST AVE
3107
TULSA
OK
74101
918-446-5581
Reference Numbers (Part Numbers)
16801
834X6
834X6
9029203
9029203
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
WIDTH ACROSS
Required Description
COPPER ALLOY OVERALL
0.125 INCHES NOMINAL
5 ROUND W/FLATS
1.640 INCHES MINIMU
