National Item Identification Number
00-079-9657
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
00088
ROYAL OAK GAGE INC
321 PARK DRIVE
TROY
MI
48083
248-585-5800
08244
MOELLER MFG COMPANY INC
DIV AIRCRAFT
30100 BECK RD
WIXOM
MI
48393
248-960-3999
21128
JDMC ENTERPRISES
DBA HIGH SPEED MACHINE PRODUCTS
31 CHARTER OAK PL. 3
HARTFORD
CT
06106
860-985-1134
77445
Reference Numbers (Part Numbers)
487054CL9
487054CL9
487054CL9
487054CL9
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
STEEL COMP 410 OVERALL
AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
0.54