National Item Identification Number
00-809-0343
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
59364
64547
09691
L-3 COMMUNICATIONS ELECTRONIC
SYSTEMS INC
25 CITYVIEW DR
TORONTO
M9W 5A7
CANADA
416-249-1231
24617
Reference Numbers (Part Numbers)
1110350
1110350
1110350
8599468-222
8599468-222
8599468-222
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
STEEL CORROSION RESISTING OVERALL
MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE
