National Item Identification Number
00-821-9906
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
27307
JLM ELECTRONICS INC
DBA PACK RITE COMPANY
450 S FELLOWSHIP RD
MAPLE SHADE
NJ
08052
856-667-2284
06481
13499
13499
74921
ITEN INDUSTRIES
4001 BENEFIT AVE
2150
ASHTABULA
OH
44005
440-997-6134
Reference Numbers (Part Numbers)
AD6099128
119420
302-3900-00
302-3900-000
302-3900-000
Required Categories
Required Description