National Item Identification Number

00-084-1769

National Stock Number

Item Name

WASHER,FLAT

Federal Supply Class

5310

Description

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Commercial and Government Entity Code (Supplier Data)

---

00771

---

PERFORMANCE PLASTICS PRODUCTS INC
5055 CRANSWICK RD
16080
HOUSTON
TX
77222
713-690-4800

---

00771

---

PERFORMANCE PLASTICS PRODUCTS INC
5055 CRANSWICK RD
16080
HOUSTON
TX
77222
713-690-4800

---

12599

---

SAINT-GOBAIN PERFORMANCE PLASTICS
CORPORATION
7301 ORANGEWOOD AVENUE
GARDEN GROVE
CA
92841
714-238-1315

---

75165

---

---

Reference Numbers (Part Numbers)

B1743A1
B2093A1
FC020262-1
JM6C1-15
64794-0001

Required Categories

MATERIAL
HARDNESS RATING
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMET

Required Description

PLASTIC TETRAFLUOROETHYLENE OVERALL
65.0 DUROMETER NOMINAL
1.000 INCHES MINIMU