National Item Identification Number
00-086-9185
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
07332
WAUKESHA BEARINGS CORPORATION
W231N2811 ROUNDY CIR E
PEWAUKEE
WI
53072
262-506-3051
99048
WAUKESHA CUTTING TOOLS INC
1111 SENTRY DR
WAUKESHA
WI
53187
262-544-8740
Reference Numbers (Part Numbers)
DD075-000-196PC15
DD075-000-196PC15
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
PERIPHERAL SHAPE STYLE
CENTER H
Required Description
STEEL COMP 1018 OVERALL
SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
1 ROUND;