National Item Identification Number
00-880-8205
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
01343
ANDERSON GREENWOOD LP
DBA ANDERSON GREENWOOD CROSBY
3950 GREENBRIAR ST
STAFFORD
TX
77477
508-384-4831
01343
ANDERSON GREENWOOD LP
DBA ANDERSON GREENWOOD CROSBY
3950 GREENBRIAR ST
STAFFORD
TX
77477
508-384-4831
0AT62
01343
ANDERSON GREENWOOD LP
DBA ANDERSON GREENWOOD CROSBY
3950 GREENBRIAR ST
STAFFORD
TX
77477
508-384-4831
01343
ANDERSON GREENWOOD LP
DBA ANDERSON GREENWOOD CROSBY
3950 GREENBRIAR ST
STAFFORD
TX
77477
508-384-4831
01343
ANDERSON GREENWOOD LP
DBA ANDERSON GREENWOOD CROSBY
3950 GREENBRIAR ST
STAFFORD
TX
77477
508-384-4831
Reference Numbers (Part Numbers)
A6486-002-142
A6486-005-142
200103CZPC425
200103CZPC425
9520-24E
9663-24E;
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
PLASTIC OVERALL
0.125 INCHES NOMINAL
1 ROUND
0.219 INCHES NOMINAL
1 ROUND
1
