National Item Identification Number
00-965-6469
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
0HMS1
CADILLAC GAGE TEXTRON
DIV HR TEXTRON/CADILLAC GAGE TEXTRON
25200 W. RYE CANYON RD.
SANTA CLARITA
CA
91355
661-702-5256
10237
CADILLAC GAGE TEXTRON INC.
776 HENRRIETTA CREEK
ROANOKE
TX
76262
817-280-7632
Reference Numbers (Part Numbers)
25452
25452
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HARDNESS RATI
Required Description
STEEL COMP 631 OVERALL
AMS 5644 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PASS
