National Item Identification Number
01-020-9663
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
72606
GASKET MANUFACTURING CO
DBA GASKET MANUFACTURING CO
18001 S MAIN ST
GARDENA
CA
90248
310-217-5619
79274
WESTERN GASKET AND PACKING CO
3007 FRUITLAND
LOS ANGELES
CA
90058
323-583-9731
82577
Reference Numbers (Part Numbers)
G3M27C58-309
H400-309
935400-309
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
MIL-M-20693,TYPE 1 MIL SPEC SINGLE MATE
