National Item Identification Number
01-037-1236
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
61000
GLOBE FASTENERS INC
34-24 56TH ST
WOODSIDE
NY
11377
718-457-0303
1YGB8
CAREY MANUFACTURING COMPANY INC
DBA AMATOM ELECTRONIC HARDWARE
5 PASCO HILL RD
CROMWELL
CT
06416
860-828-0847
19397
19200
24290
DRS TEST & ENERGY MANAGEMENT INC
110 WYNN DR NW
HUNTSVILLE
AL
35805
256-895-2020
Reference Numbers (Part Numbers)
N-7703-116
2202-N116
2202-N116
24742-0001
9358439
9358439
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
PLASTIC POLYAMIDE OVERALL
MIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE OR
L-P