National Item Identification Number
01-042-0542
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
96169
03950
NAVAL INVENTORY CONTROL POINT
MECHANICSBURG
5450 CARLISLE PIKE
2020
MECHANICSBURG
PA
17055
717-605-3500
03950
NAVAL INVENTORY CONTROL POINT
MECHANICSBURG
5450 CARLISLE PIKE
2020
MECHANICSBURG
PA
17055
717-605-3500
Reference Numbers (Part Numbers)
2640-150 PIECE 22
2640-150 PIECE 22CP
845-2007651 PIECE 22
845-2007651 PIECE
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
PLASTIC POLYAMIDE OVERALL
GS1990,FSCM 96169 MFR REF SINGLE MATERIAL RESPONSE OV
