National Item Identification Number
00-145-2185
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
02064
C B C INDUSTRIES INC
DBA AMERICAN DRILL BUSHING COMPANY
7141 PARAMOUNT BLVD
PICO RIVERA
CA
90660
323-725-1515
Reference Numbers (Part Numbers)
ADB26550
Required Categories
MATERIAL
SURFACE TREATMENT
COLOR
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERA
Required Description
STEEL OVERALL
OXIDE FILM OVERALL
BLACK OVERALL
0.281 INCHES NOMINAL
1 ROUND;