National Item Identification Number
01-070-9749
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
72038
EASTERN INDUSTRIAL PRODUCTS INC
DBA SMITH-KOCH INC/EASTERN
830 TRYENS RD
ASTON
PA
19014
610-459-1212
Reference Numbers (Part Numbers)
NAS1515B7
63-E-34 PIECE 19
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HARDNESS RATING
HOLE DIAMETER;
Required Description
RUBBER SYNTHETIC OVERALL
ZZ-R-765,CL 2A,GRADE 50 FED SPEC SINGLE MATERIAL RESPO
