National Item Identification Number
01-081-0470
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
24975
PRESTOLITE ELECTRIC INCORPORATED
LEECE-NEVILLE DIV
2311 GREEN RD STE B
ANN ARBOR
MI
48105
585-492-1700
45152
OSHKOSH TRUCK CORPORATION
DIV OSHKOSH TRUCK CORPORATION
2307 OREGON ST
OSHKOSH
WI
54902
800-392-9921
Reference Numbers (Part Numbers)
36910
36910
50AX166
Required Categories
SURFACE TREATMENT
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENT
Required Description
CADMIUM OVERALL
0.170 INCHES MINIMUM AND
0.173 INCHES MAXIMUM
1 ROUND
0.281
