National Item Identification Number
01-084-2510
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://compressors.tpub.com//TM-5-4310-354-24P/css/TM-5-4310-354-24P_131.htm
Referenced on: http://compressors.tpub.com//TM-5-4310-354-24P/css/TM-5-4310-354-24P_176.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
76005
16004
29215
JENNY PRODUCTS INCORPORATED
850 NORTH PLEASANT AVENUE
SOMERSET
PA
15501
814-445-3400
NSN (National Stock Number) 5310-01-084-2510, 5310010842510 NIIN (National Identification Number) 01-084-2510, 010842510
Part Numbers (Reference Numbers)
J-2049-52
80054
80054
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
STEEL OVERALL
0.557 INCHES MINIMUM AND
0.577 INCHES MAXIMUM
1 ROUND
2.380 IN