National Item Identification Number
01-092-0241
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
98869
HOWELL INSTRUMENTS INC.
3479 W. VICKERY BLVD.
FORT WORTH
TX
76107
817-336-7411
15526
METRIC AND MULTISTANDARD
COMPONENTS CORP
120 OLD SAW MILL RIVER RD
HAWTHORNE
NY
10532
914-769-5020
23386
THALES COMMUNICATIONS INC.
22605 GATEWAY CENTER DR
CLARKSBURG
MD
20871
800-914-0303
Reference Numbers (Part Numbers)
BH7561
127BSXM3
71251
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
PLASTIC PHENOLIC OVERALL
C155 PHE SHT.1/16 THK.FSCM 98869 MFR REF SINGLE MATERI