National Item Identification Number
01-104-5933
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
63743
WARD LEONARD ELECTRIC COMPANY INC
401 WATERTOWN RD
THOMASTON
CT
06787
860-283-5801
22525
INSTRUMENTS & FLIGHT RESEARCH INC.
2716 GEORGE WASHINGTON BLVD.
WICHITA
KS
67210
316-684-5177
Reference Numbers (Part Numbers)
25151.28-2
61957-2
Required Categories
MATERIAL
COLOR
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER
Required Description
RUBBER SYNTHETIC OVERALL
WHITE OVERALL
0.125 INCHES NOMINAL
1 ROUND
1.125 IN
