National Item Identification Number
01-107-7905
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
33051
LILBERN DESIGN OF VIRGINIA LLC
200 PACKAGING DR
146
WEYERS CAVE
VA
24486
540-234-9900
Reference Numbers (Part Numbers)
2000-0004-1
Required Categories
MATERIAL
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE SHAPE STYLE
CRO
Required Description
PLASTIC OVERALL
1 ROUND
0.500 INCHES NOMINAL
1 ROUND
1 RECTANGULAR
0.035 IN