National Item Identification Number

01-115-9717

National Stock Number

Item Name

WASHER,FLAT

Federal Supply Class

5310

Description

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Commercial and Government Entity Code (Supplier Data)

---

06401

---

L-3 COMMUNICATIONS CORPORATION
DBA COMMUNICATIONS SYSTEMS WEST DIV
640 N 2200 W
SALT LAKE CITY
UT
84116
801-594-7777

---

Reference Numbers (Part Numbers)

2202156-00

Required Categories

MATERIAL
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE SHAPE STYLE
CEN

Required Description

PLASTIC OVERALL
1 ROUND
0.750 INCHES NOMINAL
9 SQUARE
0.342 INCHES NOMINAL;