National Item Identification Number
01-116-4839
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
0ZGC1
METRIC SPECIALTIES INC
622 S FLOWER ST
BURBANK
CA
91502
818-848-6696
19200
59563
REID PRODUCTS INC
21430 WAALEW RD
APPLE VALLEY
CA
92307
760-240-1355
Reference Numbers (Part Numbers)
12524631-2
12524631-2
12524631-2
Required Categories
MATERIAL
SURFACE TREATMENT
HARDNESS RATING
PERIPHERAL SHAPE STYLE
OVERALL DI
Required Description
STEEL OVERALL
CADMIUM OVERALL
50.0 ROCKWELL C NOMINAL
1 ROUND
24.1 MILLIMETE