National Item Identification Number
01-160-1814
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
13499
86928
SEASTROM MANUFACTURING CO.
456 SEASTROM ST
TWIN FALLS
ID
83301
208-737-4300
19059
DATAMETRICS CORPORATION
1717 DIPLOMACY ROW
ORLANDO
FL
32809
407-251-4577
Reference Numbers (Part Numbers)
302-0642-150
5602-10-32
700229-0001
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
PAPER OVERALL
0.124 INCHES MINIMUM AND
0.134 INCHES MAXIMUM
1 ROUND
0.305 IN
