National Item Identification Number

01-164-6363

National Stock Number

Item Name

WASHER,FLAT

Federal Supply Class

5310

Description

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Commercial and Government Entity Code (Supplier Data)

---

04845

---

AUTOMATIC SWITCH CO
DBA ASCO
50 HANOVER RD
FLORHAM PARK
NJ
07932
973-966-2258

---

04845

---

AUTOMATIC SWITCH CO
DBA ASCO
50 HANOVER RD
FLORHAM PARK
NJ
07932
973-966-2258

---

D9182

---

---

Reference Numbers (Part Numbers)

AV182-430 PIECE 81
GV-8257-124G
8257-1246

Required Categories

MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
THE MANUFACTURERS DATA
MANUFACT

Required Description

NICKEL ALLOY 400 OVERALL
QQ-N-281,CLASS A,FORM 4 OR 5 FED SPEC SINGLE MATERIAL