National Item Identification Number
01-194-8593
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
18876
21530
SPENCER INDUSTRIES INC
80 HOLMES ST
BELLEVILLE
NJ
07109
973-751-2200
3V055
ANCO MACHINE CO
DBA
564 BELL FACTORY RD
HUNTSVILLE
AL
35811
256-859-1178
Reference Numbers (Part Numbers)
13220552
13220552
13220552
Required Categories
Required Description