National Item Identification Number
01-201-0304
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D9182
D9182
D8266
MTU FRIEDRICHSHAFEN GMBH
FRIEDRICHSHAFEN GMBH
MAYBACHPLATZ 1
FRIEDRICHSHAFEN
88045
GERMANY
07541-90-0
14153
Reference Numbers (Part Numbers)
P3727
000988 063100
000988063100
000988063100
Required Categories
III FSC APPLICATION DATA
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN CON
Required Description
ENGINE DSL
14153
000988063100