National Item Identification Number
00-115-6801
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
81346
AMERICAN SOC FOR TSTG & MTLS
DBA ASTM INTERNATIONAL
100 BARR HARBOR DR
WEST CONSHOHOCKEN
PA
19428
610-832-9500
81346
AMERICAN SOC FOR TSTG & MTLS
DBA ASTM INTERNATIONAL
100 BARR HARBOR DR
WEST CONSHOHOCKEN
PA
19428
610-832-9500
81346
AMERICAN SOC FOR TSTG & MTLS
DBA ASTM INTERNATIONAL
100 BARR HARBOR DR
WEST CONSHOHOCKEN
PA
19428
610-832-9500
81346
AMERICAN SOC FOR TSTG & MTLS
DBA ASTM INTERNATIONAL
100 BARR HARBOR DR
WEST CONSHOHOCKEN
PA
19428
610-832-9500
05824
Reference Numbers (Part Numbers)
ASTM-A666 TY 302 ANNEALED
ASTM/A240 TY 304 ANNEALED
ASTM/A240 TY 321 ANNEALED;
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT
Required Description
STEEL COMP 302 OR
STEEL COMP 304 OR
STEEL COMP 321 OR
STEEL COMP 347 OVERALL;