National Item Identification Number
00-119-4653
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
88174
INGERSOLL RAND CO
ATHENS PLANT
101 N MAIN ST
ATHENS
PA
18810
570-888-7777
30760
INGERSOLL RAND CO
200 CHESTNUT RIDGE RD
636
WESTWOOD
NJ
07675
201-573-0123
88174
INGERSOLL RAND CO
ATHENS PLANT
101 N MAIN ST
ATHENS
PA
18810
570-888-7777
Reference Numbers (Part Numbers)
D26697
P25-35
P25-35
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
WOOL OVERALL
0.812 INCHES NOMINAL
1 ROUND
1.500 INCHES NOMINAL
1 ROUND
1 RE