National Item Identification Number
01-282-8199
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
0BWH8
AMERICAN INTERNATIONAL LTD
1098 BELLE MEADOWS WAY
SALT LAKE CITY
UT
84121
801-261-5667
76301
76823
76823
80132
Reference Numbers (Part Numbers)
74A330010-2007
74A330010-2007
74A330010-2007
74A330010-2013
75310012828199
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
STEEL COMP 321 OVERALL
AMS5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
0.630