National Item Identification Number
01-300-9741
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
U1494
GILBERT GILKES & GORDON LTD
CANAL IRON WORKS
KENDAL
LA9 7BZ
UNITED KINGDOM
01539 720028
8T582
TRU-RAY INC
6328 CUESTA PL NW
7835
ALBUQUERQUE
NM
87194
505-220-8281
03950
NAVAL INVENTORY CONTROL POINT
MECHANICSBURG
5450 CARLISLE PIKE
2020
MECHANICSBURG
PA
17055
717-605-3500
Reference Numbers (Part Numbers)
3315-165
3315-165
3315-165
3315-165VM
Required Categories
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
CRITICALITY CODE JUSTIFICATION
Required Description
MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
ZZZY
CENTRIFUGAL