National Item Identification Number
00-167-0698
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-11-6660-206-34P/TM-11-6660-206-34P0234.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-11-6660-206-34P/TM-11-6660-206-34P0247.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
K0967
72314
58880
56232
18876
Reference Numbers (Part Numbers)
AN960B4
B18613
B299-125
FFW92
NA10447
0187-5
6204
8176678
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
COPPER ALLOY 613 OVERALL
0.120 INCHES MINIMUM AND
0.130 INCHES MAXIMUM
1 ROUN
