National Item Identification Number
01-312-3369
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
53711
53711
53711
70876
BATH IRON WORKS CORPORATION
700 WASHINGTON ST
BATH
ME
04530
207-442-2827
Reference Numbers (Part Numbers)
803-1624106 PC1
803-1624106 PIECE 155
803-5959176 PC
803-5959176 PIECE 83
80
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
COPPER ALLOY 464 OVERALL
QQ-B-637 FED SPEC SINGLE MATERIAL RESPONSE OR
ASTM B2