National Item Identification Number
01-336-1289
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
1PQF4
L-3 COMMUNICATIONS CORPORATION
DIV LINK SIMULATION & TRAINING
2200 ARLINGTON DOWNS ROAD
ARLINGTON
TX
76011
817-619-3754
Reference Numbers (Part Numbers)
69248
69248
Required Categories
SPECIFICATION/STANDARD DATA
Required Description
36378-69248 MANUFACTURERS STANDARD