National Item Identification Number
01-382-4249
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
0DBW2
PHOTONICS SYSTEMS INC
6949 WALES RD
NORTHWOOD
OH
43619
419-666-6325
55566
R A F ELECTRONIC HARDWARE INC
95 SILVERMINE RD
SEYMOUR
CT
06483
203-888-2133
Reference Numbers (Part Numbers)
M-16569-0
5076-N-103
Required Categories
Required Description