National Item Identification Number

01-382-5916

National Stock Number

Item Name

WASHER,FLAT

Federal Supply Class

5310

Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-254-24P/css/TM-9-2815-254-24P_105.htm
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-254-24P/css/TM-9-2815-254-24P_79.htm

Description

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Commercial and Government Entity Code (Supplier Data)

---

S0226

---

ISUZU MOTOR CO. LTD
22-10 MINAMI-OI
6 CHOME SHINAGAWA-KU
TOKYO
JAPAN

---

Z0X96

---

ISUSZU-GENERAL MOTORS AUST LTD
858 LORIMER ST
PORT MELBOURNE
3207
AUSTRALIA
03-96446666

---

Z5394

---

LAND ROVER AUSTRALIA PTY LTD
75 ANNANDALE RD
LB2214
TULLAMARINE
3043
AUSTRALIA
1800818620

---

Reference Numbers (Part Numbers)

9095714160
9095714160
9095714160

Required Categories

MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S

Required Description

COPPER OVERALL
16.200 MILLIMETERS NOMINAL
1 ROUND
26.000 MILLIMETERS NOMINAL;