National Item Identification Number
01-388-2635
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
U2445
SIEMENS MOORE PROCESS AUTOMATION
COPSE ROAD
LUFTON YEOVIL
BA22 8RN
UNITED KINGDOM
01935 706262
41387
SIEMENS ENERGY & AUTOMATION
1201 SUMNEYTOWN PIKE
PO BOX 900
SPRING HOUSE
PA
19477
215-646-7400
Reference Numbers (Part Numbers)
14404-205
14404-205
Required Categories
Required Description