National Item Identification Number
01-396-3219
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
61178
TUTHILL CORPORATION
DBA TUTHILL PUMP GROUP
12500 S PULASKI RD
ALSIP
IL
60803
708-389-2500
61178
TUTHILL CORPORATION
DBA TUTHILL PUMP GROUP
12500 S PULASKI RD
ALSIP
IL
60803
708-389-2500
Reference Numbers (Part Numbers)
HD015/TM102PG3ITEM20
P806-4
Required Categories
MATERIAL
Required Description
STEEL OVERALL