National Item Identification Number
01-420-3163
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
13764
MICRO PLASTICS INC
11 INDUSTRY LN HWY 178 N
149
FLIPPIN
AR
72634
870-453-2261
3R801
KNOEDLER MANUFACTURERS INC
7185 TOWER RD
BATTLE CREEK
MI
49014
269-969-7722
Reference Numbers (Part Numbers)
12SWS3007
87113
Required Categories
MATERIAL
III END ITEM IDENTIFICATION
Required Description
PLASTIC OVERALL
USED ON LSVW LIGHT SUPPORT VEHICLE WHEELED 1.5 TON TRUCK DRIVER
