National Item Identification Number
00-186-4138
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
01359
02249
PARKER HANNIFIN CORPORATION
DIV HYDRAULIC VALVE DIVISION
600 HOOVER STREET NE
MINNEAPOLIS
MN
55413
440-366-5100
97451
HOUGHTON INTL INC
3431 CARRIAGE DR
25930
SANTA ANA
CA
92799
714-545-8467
Reference Numbers (Part Numbers)
AN6246-10
AN6246-10
AN6246PC10
MS35803-112
XT36143PC14
X1-4100-1494483PC14;
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
LEATHER OVERALL
0.508 INCHES NOMINAL
1 ROUND
0.688 INCHES NOMINAL
1 ROUND
1