National Item Identification Number
01-466-7552
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
44408
OBERDORFER FOUNDRIES INC
6259 THOMPSON RD
SYRACUSE
NY
13206
315-437-7588
D9182
4K628
OBERDORFER PUMPS INC
5900 FIRESTONE DR
SYRACUSE
NY
13206
315-437-0361
44408
OBERDORFER FOUNDRIES INC
6259 THOMPSON RD
SYRACUSE
NY
13206
315-437-7588
87801
WILMINGTON FIBRE SPECIALTY CO
700 WASHINGTON ST
NEW CASTLE
DE
19720
302-328-7525
Reference Numbers (Part Numbers)
A-6965
A6965
6965
6965
6965
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
COTTON OVERALL
1.005 INCHES MINIMUM AND
1.020 INCHES MAXIMUM
1 ROUND
1.188 I