National Item Identification Number
01-470-7773
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
77907
MARSHALL EXCELSIOR CO
110 S HAMILTON
228
MARSHALL
MI
49068
269-781-7300
Reference Numbers (Part Numbers)
82-5764 NON-ASBESTOS
Required Categories
HOLE DIAMETER
OVERALL DIAMETER
SPECIAL FEATURES
Required Description
0.250 INCHES NOMINAL
0.812 INCHES NOMINAL
CONTAINS NON-ASBESTOS MATERIAL